Xinfa Airport Equipment Ltd.
AIRPORT GROUND SUPPORT EQUIPMENT, COUNT ON US!
Add to Cart
Airport Transfer Bus 2.5M High Quality Durable and Capacity Passenger Compartment
Specification:
| No. | Particulars | Specs |
|---|---|---|
| 1. | Length × Width ×Height | 13650mm×2700mm×3178mm |
| 2. | Bus body | Low carbon alloy steel body with aluminum apron; |
| 3. | Wheel base | 6670mm |
| 4. | Passenger accommodation capacity | Up to 77 passengers including thirteen (13) seats, in compliance with IATA specifications: four (4) Passengers per sqm |
| 5. | Curb weight | 12250kgs |
| 6. | The varied height from passenger cabin floor sill to the ground level | 270mm~340mm subject to embarkation and/or disembarkation of passengers |
| Curb weight | 12T |
| The varied height from passenger cabin floor sill to the ground level | 270mm |
| Minimum turning radius | <13500mm |
| Engine | 4-strok, diesel engine |
Emergency system:
1. Set the brake system discharge device by following the instruction labeled;
2. The emergency cover on wheel cover should be sealed to prevent from waterproof;
Driver cabin door:
1. Numbers: 02 nr.
2. Articulated and outward opening single-leaf door, and each door uses the rod limit and lock mechanism;
3. Water drainage gutter is installed in the upper part of each door.